[. . . ] Rather than just throwing these materials away, please ensure that they are recycled. Disposal of your old appliance or machine Electrical and electronic appliances / machines often contain materials which, if handled or disposed of incorrectly, could be potentially hazardous to human health and to the environment. They are, however, essential for the correct functioning of your appliance or machine. Please do not therefore dispose of it with your household waste. Please dispose of it at your local community waste collection / recycling centre and ensure that it presents no danger to children while being stored for disposal. It should be unplugged or disconnected from the mains electricity supply by a competent person. [. . . ] A time of between 15 minutes up to 9 hours can be set. 40 Settings: Customising your machine ^ Set the duration after which you want the lighting to switch off by touching the sensors on the right beside "+" or "-". Dim These are the same as the settings for "Dim" when the machine is switched on. Touch the sensor beside "ok" to save the settings. Touch "+ C" to return to the previous options. Displaying the number of cups of coffee already dispensed (Total no. of coffees", the number of espressos, coffees and cappuccinos dispensed to date will appear in the display. The Settings menu will reappear after a few seconds or if you touch the sensor beside "ok". System lock The machine can be locked to ensure that it is not operated by unsupervised children or persons who are unacquainted with the operating instructions. Before you can activate the system lock you must first do the following via the Settings menu: ^ Touch the sensor beside "Settings". Settings ß Lighting ß Total no. of coffees ß System lock ^ Touch the sensor beside "System lock". 41 Settings: Customising your machine The tick will show if the system lock has been set to "Can be activated" or "Cannot be activated". If you touch the sensor beside "Cannot be activated" then the machine cannot be locked. (safety feature) ^ Touch the sensor beside "ok" and switch off the machine. ^ Touch the sensor beside "On" and then the sensor beside "ok". To deactivate the system lock ^ Touch the lower sensor on the right beside X. ^ Touch the sensor beside "Yes" if you are sure that you want to delete the selected name. Change name ^ If you want to change a name, touch the sensor next to "Change name" and touch the sensor beside "ok". 45 Settings: Customising your machine ^ Now change the name and touch the sensor beside "ok". Change You can programme the machine so that it always reverts to the Standard profile or so that it continues to operate using a User profile you have set. To set the profile to be used: ^ touch the sensor beside "Change". You can now select one of the following: Do not change The machine will continue to operate using the User profile you have selected until you select another User profile. When switched on Each time the machine is switched on it will automatically select the Standard user profile regardless of which Profile was set before the machine was last switched off. After each use The machine will automatically revert to the Standard User profile each time a drink is dispensed. Selecting a user profile ^ In the main menu touch the sensor beside "Standard" and then touch the sensor beside the Profile you wish to set. ^ Then touch the sensor beside "ok". 46 Settings: Customising your machine Display You can adjust both the contrast and the brightness of the display: ^ Touch the sensor beside "Settings". Settings ß Water hardness ß User profile ß Display ^ Touch the sensor beside "Display". ^ Touch the sensor beside Contrast or Brightness and set the level with the middle sensor on th right or left of the display. ^ Touch the sensor beside "ok" to save the setting. Buzzer tones You can choose for an audible tone to sound each time a sensor is touched. ^ Touch the sensor beside "Settings". Settings ß User profile ß Display ß Buzzer tones ^ Touch the sensor beside "Buzzer tones". [. . . ] Installation, repairs and other work by unqualified persons could be dangerous. Ensure power is not supplied to the appliance until after installation work has been carried out. The appliance is supplied with a mains cable with moulded plug for connection to a 230 - 240 V mains supply. Connection should be made via a fused plug and suitable switched socket which is easily accessible after installation. [. . . ]